RS-Aerogel Coating – RSinsulationboard

Revestimiento de aerogel RS

RS-Aerogel Coating is a high-performance thermal insulation material with silica aerogelas its core functional component. It forms a dense, nanoporous barrier on equipment surfaces via spraying or brushing application.

Key Features

Estructura técnica básica:

Elimination of Thermal Bridges: Provides 100% gap-filling for complex shapes like valves and flanges, completely eliminating “thermal bridge” effects that are difficult for traditional insulation to cover.
Ultra-thin Anti-scald & Anti-condensation: A mere 2-3mm coating significantly reduces surface temperatures of high-heat equipment to prevent personnel burns or eliminate condensation on cryogenic pipes.
CUI Protection: The coating adheres tightly to the substrate, preventing moisture from reaching the metal surface and solving the problem of Corrosion Under Insulation (CUI) at its root.

Ventajas del producto:

Superior Thermal Insulation：Features ultra-low thermal conductivity ( 0.035W/(m·K)), achieving significant heat insulation and energy savings with an ultra-thin film.
Fire Safety & Eco-friendly：Achieves Class A non-combustible rating; utilizes a water-based system free from asbestos and toxic substances, making it safe for both applicators and the environment.
Efficient Application & Durability：Supports airless spraying for rapid installation; chemically stable with a service life exceeding 15 years without performance degradation.

Technical

Standard Dimensions:

Modelo de producto	Appearance	Solid Content	Surface Dry/Full Cure	Application	Density
Revestimiento de aerogel RS	White Paste，Grey Paste	55% – 65%	2-4h/48-72h	Airless Spraying，Brushing，Troweling	500kg/m³-700kg/m³

Anti-scald Performance Reference:

Pipe Temp	Coating Thickness	Surface Temp
100℃	2mm	≈55℃
100℃	4mm	≈60℃
100℃	6mm	≈65℃

Especificaciones técnicas:

Modelo de producto	Conductividad térmica	Resistencia a la compresión	Adhesion Strength	Hydrophobicity	Service Temp	Clasificación de incendios	VOC Content
Revestimiento de aerogel RS	≤0.035 W/(m·K)	≥0.5 MPa	≥0.1 MPa	≥98%	-50℃ to 200℃	A1	≤10g/L