I. Construction Method Statement: Aerogel Systems (Thin-Plaster & Integrated) In exterior wall applications, Aerogel blankets are typically integrated as high-performance core materials within a system rather than being exposed. Substrate Preparation Flatness Control: The substrate deviation must...

  I.Substrate Preparation & Surveying Substrate Requirements: The wall surface must be flat, dry, and free of oil stains. If the flatness deviation exceeds 4 mm, a leveling mortar coat is required. Surveying & Setting Out: Based on the architectural drawings, mark horizontal and vertical control...

I. Adhesive Distribution & Layout For standard-sized insulation boards , the distribution rules are as follows:The Peripheral Ribbon (Frame）: Apply a continuous strip of bonding mortar around the entire perimeter of the insulation board. The width should typically be , with a thickness of approx....