I.Substrate Preparation & Surveying Substrate Requirements: The wall surface must be flat, dry, and free of oil stains. If the flatness deviation exceeds 4 mm, a leveling mortar coat is required. Surveying & Setting Out: Based on the architectural drawings, mark horizontal and vertical control...

I. Adhesive Distribution & Layout For standard-sized insulation boards , the distribution rules are as follows:The Peripheral Ribbon (Frame）: Apply a continuous strip of bonding mortar around the entire perimeter of the insulation board. The width should typically be , with a thickness of approx....

I. Project Overview & Material Selection High-rise buildings impose strict limitations on the fire rating (typically Class A) and dead load of insulation materials. Commonly Used Materials: Aerogel insulation boards, Rock Wool (Mineral Wool) boards, and granulated thermal insulation mortar. Core...